Recolight: introducing The Reuse Hub

This article is more than 3 years old

The Circular Economy has one overwhelming aim and that is to keep products away from the waste stream. There are three Rs that demonstrate the ways that this can be achieved: Reduce – Reuse – Remanufacture.

.

Setting the primary R of Reduce to one side, because that’s a different discussion altogether, and we’ve certainly been engaged with the R for Remanufacturing model for the past couple of years, this article is all about that second R of Reuse, a concept that needs to be available to all of us.

The principle behind Reuse is that existing products may have a life beyond their original installation. After all, LEDs have a long life and there are any number of occasions where fixtures are removed while there is plenty of life left in them. How can we get those fixtures back into use?

Beyond that, manufacturers are regularly obliged to remove fixtures from their shelves because it’s felt that they have reached the end of their usefulness – perhaps they’ve been overtaken by more efficient versions, or the product range has been removed from the catalogue on aesthetic grounds. Whatever the reason, these are luminaire that have been made and haven’t seen any use at all.

Recolight has thrown its hat into the ring as a go-between between stockholders of old/redundant fixtures and those (specifiers and installers) who may be looking for zero-cost lighting solutions for their clients.

The Reuse Hub brings together donors  and recipients.

  • Donors of fixtures populate a database of luminaires that are obsolete; either they’ve sat on manufacturers/stockists shelves for too long
    or
    a building-full of fixtures has been salvaged by the strip-out team and is now looking for a new home.
  • Recipients are those who take on the ownership of the fixtures for onward installation.

.

.

Let’s look at the process. What is actually required to make this work?

The stockholder as donor:

Equipment that is sitting on a shelf has value; it is part of the company’s overall valuation and it’s recorded as such in the company’s annual report. When product is sent for WEEE recycling, that value is written off. The same thing needs to happen with stock that is ‘donated’ to The Reuse Hub but, physically, the fixtures still exist within the manufacturers premises.

There are any number of ways that this can be handled, but the one that seems most practical is to establish a Reuse Hub bonded store. The bonded store is an accepted way of separating physical stock. How long fixtures can be held in the Reuse Hub store is a matter for the donor. There’s only so much shelf space that can be committed to this exercise, after all. Eventually, if no one wants the fixtures they WILL end up at a WEEE recycling plant.

The salvage contractor as donor:

I don’t think this person really exists at the moment. We have examples, for sure; managers of the more responsible catA fit-outs, for example, where unwanted installed equipment goes back to the originating manufacturer, but we haven’t yet worked out how that equipment might end up in a third party (salvage) premises.

Nevertheless, such salvage companies can also sign-up to the Reuse Hub to let everyone know that they have stock of equipment available. To be eligible for the Reuse Hub, that product will need to be as removed, and be offered at no cost.

For a good reason.

The Reuse Hub is a free-supply service. Fixtures (including lamps, light engines and components) are donated because they have no financial value. We’ve seen projects where such kit is donated to social projects, but the Reuse Hub doesn’t place such a restriction on the future use of luminaires. This may be a difficult concept for some, but once a product has been declared redundant and is headed for the WEEE skip, then IT HAS NO VALUE TO THE DONOR. This is an important principle; that someone else can find value in a product should be of no concern to the donor.

A codicil to that comment: if a donor doesn’t like the cut of a potential recipient’s jib, they are under no obligation to deal with them. If redundant product is possibly heading for an exclusive retail outlet at the posh end of town then that might call for a hard-nosed conversation between the parties. But the principle stands – the donor takes NO MONEY for the products featured on the Reuse Hub.

Let’s look at the Reuse Hub from the recipient point of view:

The ideal situation for a donor is the simple one: product goes up on the Reuse Hub database – and someone gets in touch a day or so later and arranges a pick-up from the donor’s premises. Job done.

Possibly more likely – especially when seen from the designer/specifier position – is that produce is identified for a project but may not be needed for some weeks/months. Now, that is a conversation.

Again, ideally for the donor, the fixtures will be picked up and stored elsewhere, leaving donor shelves vacant for more product; but that may not always be possible and the donor company may prefer to agree a space rental arrangement wit the recipient for a certain amount of time.
Its all in the conversation.

Recolight is to be congratulated for launching the Reuse Hub. It’s a new idea and we may see all kinds of variations in the way that obsolete products come back into use. In the meantime, the Reuse Hub will get this very necessary journey underway.

To find out more about the Reuse Hub, click on the image below: . . .

.

.

.

The Light Review Newsletter

* indicates required

Please confirm you'd like to hear from The Light Review by email:

You can unsubscribe at any time by clicking the link in the footer of our emails. For information about our privacy practices, please visit our website.

Latest Articles

Scroll to Top